Industrial Heat Tracing Installation Worldwide
Our Installation Teams Worldwide
Pro Therm installs industrial electric heat tracing in Germany and on international project sites. Our own specialist teams connect engineering with field execution, from heating cables on pipes and vessels to connections, testing and documentation.
01
One heat tracing partner from engineering to installation
Installation quality has a direct impact on reliability and service life. Heating cables must be positioned, secured, terminated, tested and documented correctly. …
Installation quality has a direct impact on reliability and service life. Heating cables must be positioned, secured, terminated, tested and documented correctly. Valves, flanges, pumps, instruments, supports and other heat-loss areas also need correct treatment during installation.
03
International industrial projects
We support plant owners, EPC contractors, engineering companies and industrial construction teams in Germany, Europe and worldwide. Mobilization, site organization and …
We support plant owners, EPC contractors, engineering companies and industrial construction teams in Germany, Europe and worldwide. Mobilization, site organization and documentation are defined for the individual project. Planning an international site assignment calls for information about construction phases, installation windows, access, site safety requirements and interfaces with piping, electrical work and insulation. This allows materials, circuits and checks to be coordinated with the actual construction schedule.
05
Testing during installation
Electrical checks during installation help identify damage before insulation or other construction activities limit access to the heating circuits. The test and …
Electrical checks during installation help identify damage before insulation or other construction activities limit access to the heating circuits. The test and documentation scope is integrated into the project execution plan. Useful checkpoints can include testing after termination, before thermal insulation is closed and before handover. Recording results against each circuit and installation location also supports later maintenance and fault finding.
07
Agree installation releases and inspection points
Before mobilisation, approved drawings, available work areas and material readiness are checked against the installation sequence. Surface work and pipe testing must be …
Before mobilisation, approved drawings, available work areas and material readiness are checked against the installation sequence. Surface work and pipe testing must be sufficiently complete for the agreed activities. Outstanding interfaces are recorded with an owner and target date.
Agreed hold points are useful before work is concealed: identify and inspect the heating circuit, then release it for insulation before the next activity starts. Site changes are linked to the circuit number and drawing revision. This supports handover between our installation team, electrical contractor, insulation contractor and operator.
09
Frequently asked questions
Where does Pro Therm install heat tracing? Pro Therm installs industrial heat tracing in Germany, across Europe and on international project sites. The location, site …
Where does Pro Therm install heat tracing?
Pro Therm installs industrial heat tracing in Germany, across Europe and on international project sites. The location, site conditions, scope and schedule are agreed for each project.
Does Pro Therm use its own installation teams?
Yes. Pro Therm deploys its own installation teams for electric heat tracing on international sites. Scope, location and project conditions are agreed for each assignment.
Can engineering and installation be supplied together?
Yes. Pro Therm can combine heat tracing engineering and field installation so design and real site execution remain closely connected.
What documents does the installation team need?
Approved installation and connection information, circuit identification, product instructions and applicable site requirements. The precise documentation scope is agreed for each project.
11
Related topics
Electric heat tracing → Engineering and design → Testing and commissioning → Chemical and petrochemical plants → Oil and gas → Valves, pumps and instrument lines →
02
Our own installation teams
Worldwide installation is a core part of our heat tracing offering. Using our own teams keeps communication between engineering, project management and the construction …
Worldwide installation is a core part of our heat tracing offering. Using our own teams keeps communication between engineering, project management and the construction site short and practical. Field feedback can be incorporated into documentation and future design decisions.
04
What we install
Depending on scope, our teams install heat tracing on piping systems, tanks and vessels, valves, pumps, instruments, hoses, loading systems and custom industrial …
Depending on scope, our teams install heat tracing on piping systems, tanks and vessels, valves, pumps, instruments, hoses, loading systems and custom industrial equipment, including associated connection and temperature-sensing components.
At valves, flanges and pumps, installation must accommodate additional heat demand and later removal. Work follows the approved design and the instructions for the selected products. Deviations from the design are recorded before insulation conceals them.
06
Site sequence and handover
Deployment of our own installation teams includes coordination of work areas, access, material availability and permits with site management. Pipework and surface …
Deployment of our own installation teams includes coordination of work areas, access, material availability and permits with site management. Pipework and surface preparation, heater installation, agreed inspections and insulation closure must follow a coordinated sequence. Differences from the drawings are recorded and returned for engineering clarification. Handover identifies the installed heating circuits and includes the agreed documentation, giving the operator a usable record of the work.
We can offer thermal insulation with partner companies and coordinate it with the sequence of trades. We carry out cabling between our control panels and the power-feed and control boxes where cable routes are already available. Routing, connection points and responsibilities are agreed with the project team.
08
Standards and technical basis
Our knowledge section explains how the standards relate to the heating task, product selection and project design. Open the standards overview →
Our knowledge section explains how the standards relate to the heating task, product selection and project design.
10
Plan the installation scope
Send the site location, project period, circuit or material list and proposed scope. We will coordinate our installation work, interfaces with other trades and the …
Send the site location, project period, circuit or material list and proposed scope. We will coordinate our installation work, interfaces with other trades and the necessary project documents with you.
Request installation support →
12
References & projects
Explore our project reports for electric heat tracing and frost heave protection. View references & projects →
Explore our project reports for electric heat tracing and frost heave protection.
Our own installation teams
Worldwide installation is a core part of our heat tracing offering. Using our own teams keeps communication between engineering, project management and the construction site short and practical. Field feedback can be incorporated into documentation and future design decisions.
International industrial projects
We support plant owners, EPC contractors, engineering companies and industrial construction teams in Germany, Europe and worldwide. Mobilization, site organization and documentation are defined for the individual project. Planning an international site assignment calls for information about construction phases, installation windows, access, site safety requirements and interfaces with piping, electrical work and insulation. This allows materials, circuits and checks to be coordinated with the actual construction schedule.
What we install
Depending on scope, our teams install heat tracing on piping systems, tanks and vessels, valves, pumps, instruments, hoses, loading systems and custom industrial equipment, including associated connection and temperature-sensing components.
At valves, flanges and pumps, installation must accommodate additional heat demand and later removal. Work follows the approved design and the instructions for the selected products. Deviations from the design are recorded before insulation conceals them.
Standards reference (checked 14 October 2026): IEC/IEEE 62395-2:2024 addresses system design, installation, maintenance and repair outside hazardous areas. DIN EN 62395-2:2014-12 remains the current German national edition. Record the agreed edition in the project documentation. IEC 60079-14:2024 addresses design, selection, installation and initial inspection of electrical Ex installations. Its German adoption is DIN EN IEC 60079-14:2026-02. It supplements general electrical-installation requirements.
Testing during installation
Electrical checks during installation help identify damage before insulation or other construction activities limit access to the heating circuits. The test and documentation scope is integrated into the project execution plan. Useful checkpoints can include testing after termination, before thermal insulation is closed and before handover. Recording results against each circuit and installation location also supports later maintenance and fault finding.
Standards reference (checked 14 October 2026): IEC 60364-6:2016, including its 2017 corrigendum, provides the international installation-verification reference. For initial verification in Germany, DIN VDE 0100-600:2017-06 applies. Product testing, installation verification and thermal operating evidence are documented separately.
Site sequence and handover
Deployment of our own installation teams includes coordination of work areas, access, material availability and permits with site management. Pipework and surface preparation, heater installation, agreed inspections and insulation closure must follow a coordinated sequence. Differences from the drawings are recorded and returned for engineering clarification. Handover identifies the installed heating circuits and includes the agreed documentation, giving the operator a usable record of the work.
We can offer thermal insulation with partner companies and coordinate it with the sequence of trades. We carry out cabling between our control panels and the power-feed and control boxes where cable routes are already available. Routing, connection points and responsibilities are agreed with the project team.